The ASI DIN rail mounted blade style fuse terminal block is designed to hold the increasingly popular mini blade type fuse as offered by companies such as Littelfuse®, Bussmann® and Wickmann®. This fuse is for low voltage circuits up to 32 volts, such as is found in most control systems. Use of this style of fuse is growing rapidly in control type applications because of the space saving design, their easy availability just about anywhere and their wide range of amperage ratings.
Fuse terminal blocks that accept the mini blade style fuse are available in single level, double level and in both screw clamp and spring clamp connection versions. In addition, this same fuse terminal block will accept a cartridge holder which can house a 5x20mm glass fuse or a diode.
The double level terminal block is especially useful in two wire circuits, such as a control loop, where you need to insert a fuse on one side of the circuit. This is accomplished very easily in this one terminal block since you have a feed through connection on the bottom level and a fuse circuit on the upper level.
ASI's broad range of marking products will save you both Time and Money. They include terminal block labels, wire markers, name plates, and much more Learn More...
View Associated Products Below to Complete Your Project
Catalog No.
Description
Screw Clamp Blade/Cartridge Fuse Terminal Block
A very compact single level fuse terminal block that is only 6mm wide and accepts the plug-in blade type fuse.
With a voltage range of up to 32 volts blade type fuses are ideal for many control circuit applications especially where space saving is necessary.
Will accept the easy-to-insert “Easy Bridge” jumpers allowing for commoning one side of multiple fuse circuits.
Both a 12 volt and 24 volt LED blown fuse indication model is also available.
Also accepts CPF/5 5x20mm fuse holder or diode
Accepts 1 – 30 amp, up to 32 Vdc, fast acting mini blade style fuses such as Bussman®ATM type, Littlefuse®297 or FK1 series and Wickmann® FK1 series according to DIN 72581/3F – ISO8820 fuse specifications
Fuses color coded for easy recognition of amperage rating
Type MPFA.4/GR, Screw Clamp Blade/Cartridge Fuse Terminal Block, Gray
Screw Clamp Blade/Cartridge Fuse Terminal Block
Easy insertion/removal blade fuse
Easy to visually identify blown fuse
Will accept the easy-to-insert "Easy Bridge" jumpers
Also accepts CPF/5 5x20mm fuse holder or diode
Accepts 1 – 30 amp, up to 32 Vdc, fast acting mini blade style fuses such as Bussman®ATM type, Littlefuse®297 or FK1 series and Wickmann® FK1 series according to DIN 72581/3F – ISO8820 fuse specifications
Fuses color coded for easy recognition of amperage rating
Type MPFA.4/L24, Screw Clamp Blade/Cartridge Fuse Terminal Block, with non-polarized LED circuit, 24 V
Screw Clamp 2-Level Terminal Block
Double level terminal block with a feed through circuit on the bottom level and a fuse circuit on the upper level.
The low voltage popular blade type fuse with a voltage rating up to 32 volts is used in this terminal block in order to maintain an overall width of only 6mm to save space in the panel.
Fuse capability is ideal for two wire circuits such as in a control loop where you need to provide fuse protection
Also accepts CPF/5 5x20mm fuse/diode holder
Accepts 1 – 30 amp, up to 32 Vdc, fast acting mini blade style fuses such as Bussman®ATM type, Littlefuse®297 or FK1 series and Wickmann® FK1 series according to DIN 72581/3F – ISO8820 fuse specifications
Fuses color coded for easy recognition of amperage rating
Type DSFA.4/L24, Screw Clamp 2-Level Terminal Block, accepts blade/cartridge fuse on upper level, 20-10 AWG, with Non-polarized LED Circuit, 24 V
Component Holder Cartridge
The CPF/5 component holder cartridge will accept a 5 X 20 mm fuse, can be ordered with or without LED blown fuse indication
Easily plugs into the MPFA.4/GR single level and DSFA.4/GR double level screw clamp terminal blocks or the HMFA.2 spring clamp terminal block.
The CPF/5 fuse holder cartridge can be ordered with 12, 24, 48, 115 or 230 volt blown fuse indication or a 1 amp or 3 amp diode or with a 1200 ohm resistor.
Component Holder Cartridge, With Non-polarized LED Circuit
The CPF/5 component holder cartridge will accept a 5 X 20 mm fuse, can be ordered with or without LED blown fuse indication
Easily plugs into the MPFA.4/GR single level and DSFA.4/GR double level screw clamp terminal blocks or the HMFA.2 spring clamp terminal block.
The CPF/5 fuse holder cartridge can be ordered with 12, 24, 48, 115 or 230 volt blown fuse indication or a 1 amp or 3 amp diode or with a 1200 ohm resistor.
Type CPF/5L230, Component holder cartridge, with non-polarized LED circuit, 230 VDC/VDC
Component Holder Cartridge With Diode
For use in place of a blade fuse
This component holder cartridge can be used in the same terminal blocks as listed under the CPF/5 and it is equipped with a 1 amp diode of the 1N4001 to 1N4007 type.
Complete line of UL1077 and UL489 miniature Circuit Breakers. 300% factory tested. 18mm and high density 13mm available. ASI circuit breakers make it EZ to save on high quality circuit protection.
Sturdy and reliable. ASI offers a complete line of DIN rail Terminal blocks. From single level feed through to high current, find the terminal block for your application.
The bench-top DIN rail cutter from ASI quickly cuts all major types of DIN rail, comes with a steel rule measuring device for setting up multiple cuts of the same length and features a hardened steel cutting die for long life. It cuts the DIN rail clean so burrs are eliminated and the long actuation lever insures that anyone can cut the DIN rail. It is half the price of comparable DIN rail cutters now on the market.
• View Discounted Internet Prices
• Check Availability
• Securely Place Orders
Find an ASI Distributor
Email Newsletter
• New Product Information
• Technical News
• Special Offers
New Interactive Circuit Breaker Catalog
Special Offer
DIN Rail Cutter
Click now to display this product's available stock level.
Click now to add this product to your shopping cart.
ASI-EZ Website SearchesThere are three different kinds of search that you can do on the ASI website:
Product Search Enter an ASI catalog number (or the leading part of the catalog number) or enter one or more words that describe the product you are looking for.
Categories Search Enter one or more words that describe the type of product you are looking for. The product Category Search will show you the sections of the ASI website for the product types you are looking for.
Cross Reference Enter a part number from a company other than ASI. This search will return all equivalent ASI products.
4700 Westport Drive, Suite 500, Mechanicsburg, PA 17055
Remit To:
P.O. Box 1340, Mechanicsburg, PA 17055
Phone:
(717) 249 - 5581 (8:30am-5:00pm ET, M-F)
Toll Free:
(877) 650 - 5160
Fax:
(717) 249 - 5542
Close Window
Use our quick login to get immediate access to our discounted web prices and product availability, as well as placing and monitoring orders through our secure online site.
If you haven't logged on before use the New Account link to the right to easily and securely set up a login id.
If you have not logged onto the site before click now to quickly, easily and securely set up an id for immediate access to product prices and availability.
Click now if you need us to send you your password in an email.
The ASI DIN rail mounted blade style fuse terminal block is designed to hold the increasingly popular mini blade type fuse as offered by companies such as Littelfuse®, Bussmann® and Wickmann®. This fuse is for low voltage circuits up to 32 volts, such as is found in most control systems. Use of this style of fuse is growing rapidly in control type applications because of the space saving design, their easy availability just about anywhere and their wide range of amperage ratings.
AC OUTLETS
