ASI DIN Rail Mount PLC Interface Terminal Block Relays

Automation Systems Interconnect, Inc.
is pleased to announce a family of high quality competitive equivalent DIN rail mounted PLC interface terminal blocks with plug-in relays. The 12 Vdc SPDT low profile ASI328035, Type ASIUDK-PLC-RI12VdcE, mounts easily in tight panel spaces and measures only 6.2 mm wide x 80.2 mm high x 82 mm long. It has a 6 Amp rating, maximum switching voltage of 250 Vac/30 Vdc and minimum switching voltage of 12 Vac/dc. The typical response time is 8ms and the typical release time is 4ms. The relay is easily replaced with the flip of the ejector tab. Once replaced, the tab secures the relay into the relay socket. The silver tin oxide contacts provide an optimum signal connection. Follow the easy to read schematic on the side of terminal block for correct wiring.

The ASI328035 has screw clamp wire terminations; however, if spring clamp terminations are preferred choose ASI328042. To bridge parallel contacts or coil points simply use the cost effective plug in jumper bar which can be cut to any length. A LED will alert with visual indication when it is time to replace the relay. The PLC pluggable relay terminal block mounts onto standard 35 mm
DIN rail.

If you would like more information, please visit our Pluggable PLC Relays. As with all ASI products order direct online and Save 20-50%.

For additional information, please contact ASI at P.O. Box 1340, Mechanicsburg, PA 17055
or call toll-free 844-886-3937.