Sensor Terminal Blocks Reduce Labor by 50%
Wiring 3-wire sensors has never been easier, AND never been as low-cost if you use the new TLS sensor terminal block from ASI. Other sensor terminal blocks, require that you purchase the terminal blocks, then purchase separate bridges to connect from block-to-block for distributing the power to the sensors. In fact, some companies are charging almost as much per position for the bridges as they are for the terminal block!
The New TLS sensor terminal block from ASI comes pre-assembled with a unique “LOCK” system for connecting the level one and level two of each terminal block together. Simply slide the terminal blocks together, tighten down the screw and you are ready to go. It is as simple as that! The last sensor block is then connected to a three level feed-through terminal block that provides power and distributes it to each sensor in the line. The bottom two levels are distributing power to the sensors while the top level is used for the signal connection.
The TLS sensor terminal block is also available with a green indicating LED either between the first level and the top level or the second level and the top level depending on whether you are connecting PNP or NPN sensors. This convenient LED then will give you status indication letting you visually check the operation of your sensor.
As you can see, significant savings in time can be accomplished with the TLS sensor terminal block. Additionally, you do not have to purchase expensive jumpers AND you will find that the price of the ASI sensor block, even with all of these features and savings, is less than what you now spend for sensor blocks. Check out our Special Internet Pricing at www.asi-ez.com or click here to review the specifications and obtain additional information.
Need more information?