The unique HM360GR has been designed such that the connections on the two sides of the terminal block are independent, not connected to each other. A jumper slot is designed into the tin-plated copper circuit bar which extends from the wire connection point. This design allows you to insert the patented "Easy Bridge" jumper into one or both sides of the terminal block, thereby connecting to a wide range of terminal blocks. For example, on one side you can jumper to fuse holder terminal blocks or circuit disconnect terminal blocks, while on the other side jumper to ground circuit terminal blocks. This is ideal for PLC's and other controllers where you may want to fuse the inputs and outputs for protection or you may require a means of opening a circuit, like a control loop, using a circuit disconnect terminal block.
Simply select the appropriate end cover and associated terminal blocks and jumpers and you are ready to design a very flexible power distribution or control circuit. If you prefer you can work with ASI to design and build complete assemblies based on your application requirements. This service will save you even more time and money.
HM360GR Power Distribution Block
HM352GR End Cover
"Easy Bridge" PTC Jumper
Combining the HM360GR power distribution block with HM352GR End Cover below allows it to be jumpered to any combination of the 5.2mm width terminal blocks below to distribute up to 24 Amps of power. Power is fed to each side independently since the two sides of the HM360GR are split.
6.2mm and 8.2mm effective widths are also available below that handle 32 Amps and 41 Amps respectively.
ASI's broad range of marking products will save you both Time and Money. They include terminal block labels, wire markers, name plates, and much more Learn More...
Two circuit connection
Stainless-Steel spring clamps for superior corrosion resistance
Tin-Plated Copper conductors
Unique marker design covers tool access holes for protection
UL 94-VO flammability rating
Can be connected with HMM.2, HMM.2/1+2,HMM.2/2+2,HMS.2,HMFA.2,HMM.4,HMM.4/1+2,HMM.2/2+2,HMM.6
Type HMR.16-2/PT/GR, DIN Rail Mounted Terminal Block End Cover, used with HM350 & HM360 for effective 5.2mm width,Gray, HMR.16-2
$0.52 / End Cover
10 $0.52 Each
Need More >> Call For Quote
The following 5.2mm terminal blocks provide a wide variety of functional choices to use with the HM350GR terminal block combined with an HM352GR end coverNext | Top
Spring Clamp Connection DIN Rail Mounted Fuse Terminal Block
Additional Accessories shown on the Datasheet
The low voltage popular blade type fuse with a voltage rating up to 32 volts is used in this terminal block in order to maintain an overall width of only 66mm to save space in the panel
Also accepts CPF/5 5x20mm fuse/diode holder
Accepts 1 - 30 amp, up to 32 Vdc, fast acting mini blade style fuses such as Bussman®ATM type, Littlefuse®297 or FK1 series and Wickmann® FK1 series according to DIN 72581/3F - ISO8820 fuse specifications
Fuses color coded for easy recognition of amperage rating
Monday-Friday: 8:30am - 5:00pm ET (Orders Placed by 4:00pm ET will Ship Same Day)
Engineering Disclaimer: On all cross-references it is the customer's responsibility to confirm that the suggested equivalent meets all requirements of the intended application, as there may be slight differences.
Automation Systems Interconnect, Inc. 4700 Westport Drive, Suite 500
| Mechanicsburg, PA 17055 REMIT-TO: P.O. Box 1340 | Mechanicsburg, PA 17055
Toll-Free: 877-650-5160 | 717-249-5581 | 717-249-5542 Fax firstname.lastname@example.org | www.asi-ez.com