4-14 Push Button Switch Crane Pendant Station Double Row
The PLB series of crane pendant controllers has a unique double row design to reduce the overall length compared to a single row pendant control station. This family of double row crane pendant control stations is available in 4, 6, 8, 10, 12 and 14 operator positions. The 4 position and 6 position crane pendant features a green start switch and an emergency stop push button switch. The 8, 10, 12 and 14 operator crane pendant controllers have a green start alarm push button switch and an emergency stop switch. All of the bi-directional push button switches in the PLB pendant stations have a mechanical interlock to prevent operator error of opposing switches. The PLB double row crane pendant controller has a double insulated housing and a pendant cable strain relief to provide a NEMA 4X rating for use in any industrial environment. Depending on the model selected push button switches are available for both single speed and two speed operation. The laser engraved switch operators on this double row crane pendant are indelible and equipped with the appropriate NO or NC electrical contact block.
Should you find that a standard off the shelf double row pendant controller for overhead cranes does not meet your needs; custom crane pendant stations are available upon request. Contact the factory with your requirements for a custom crane pendant control station. Simply select the housing and over 45 different operators and switches to come up with the ideal overhead crane pendant control station.