The panel or DIN rail mount busbar system from ASI is one of the easiest-to-use, electrician friendly, electrical connection systems on the market. This electrical busbar system features mounting supports for the 3x10 mm busbar that will allow you to mount a single, double, triple or even four busbars up to the full one meter length directly onto a panel. You can mount double or triple busbars on DIN rail. The unique wiring terminals eliminate the need for drilling and tapping of the busbar and crimping of terminals on the ends of wires, thereby saving a considerable amount of time. The terminals also come with a colored plastic housing which can be used to visually designate the lead type, such as green/yellow for ground, blue for neutral and red or black for L1, L2 or L3.
Key features of this product line which will help you on your power distribution or bussing application are:
Terminals clamp wires directly to busbar, reducing time and cost
Terminals handle from 20 AWG wires up to 1/0 cable
Terminals include color-coded plastic housings
One meter busbar can be cut to any length
Supports available for 1, 2, 3 or 4 busbars
Terminals are easily labeled
The ASI busbar system is guaranteed to save you time and money when distributing power in your equipment or panel. The ability to add numerous wires without prepping the busbar or the wire is a big plus when you need to make your connections quickly and reliably.
The ASI busbar system is made up of 3 parts; the busbar, supports for 1, 2 or 3 busbars and the terminals. No special tools are required, just mount and terminate. View Associated Products Below to Complete Your Project
Ferrules are typically used on the ends of wires especially when spring clamp terminal blocks are used. This practice began in Europe and has now become commonplace in the USA. ASI will say you additional money on your application with our wide range of low-cost ferrules and crimping tools.
Monday-Friday: 8:30am - 5:00pm ET (Orders Placed by 4:00pm ET will Ship Same Day)
Engineering Disclaimer: On all cross-references it is the customer's responsibility to confirm that the suggested equivalent meets all requirements of the intended application, as there may be slight differences.
Automation Systems Interconnect, Inc. 4700 Westport Drive, Suite 500
| Mechanicsburg, PA 17055 REMIT-TO: P.O. Box 1340 | Mechanicsburg, PA 17055
Toll-Free: 877-650-5160 | 717-249-5581 | 717-249-5542 Fax firstname.lastname@example.org | www.asi-ez.com